Détails de produit
Lieu d'origine: La Chine
Nom de marque: BLUWAT
Certification: ISO9001, SGS, BV
Numéro de modèle: BWD-01
Conditions de paiement et d'expédition
Quantité de commande min: 1000kgs
Prix: negotiable
Détails d'emballage: 30kgs, 50kgs, 250kgs, 1250kgs bat du tambour
Délai de livraison: 15 jours ouvrables normaux
Capacité d'approvisionnement: 1000tons/w
Nom de produit: |
Agent de Decolor de l'eau BWD-01 |
Un autre nom: |
Poly résine de Dicyandiamide-formaldéhyde |
Contenu solide: |
>50% |
Utilisation: |
La couleur effluente enlèvent des produits chimiques |
Échantillon: |
Libérez pour l'essai en laboratoire |
Capacité de production: |
4000Mt/m |
Marque: |
BLUWAT |
CAS No.: |
55295-98-2 |
Valeur du pH: |
3-6 |
Viscosité (25°C, cps): |
50-300 |
Gravité spécifique (à 20°C): |
1.1-1.3 |
Nom de produit: |
Agent de Decolor de l'eau BWD-01 |
Un autre nom: |
Poly résine de Dicyandiamide-formaldéhyde |
Contenu solide: |
>50% |
Utilisation: |
La couleur effluente enlèvent des produits chimiques |
Échantillon: |
Libérez pour l'essai en laboratoire |
Capacité de production: |
4000Mt/m |
Marque: |
BLUWAT |
CAS No.: |
55295-98-2 |
Valeur du pH: |
3-6 |
Viscosité (25°C, cps): |
50-300 |
Gravité spécifique (à 20°C): |
1.1-1.3 |
Effluent Color Remove Chemicals De Color Agent Bluwat
Description: Water Clarifying Agent
Specifications:
Appearance: | Colorless and Translucid Liquid |
Solid Content: | 50%min |
Viscosity(25°C, cps): | 50-300 |
PH Value (30% Water Solution): | 3-6 |
Specific Gravity (at 20°C): | 1.1-1.3 |
Water Solubility: | Completely Soluble With Water at Any Rate |
Package: | 30kgs net plastic drum, 250kgs net plastic drum palletized, 1250kgs net IBC drum |
Storage Temperature: | Room temperature |
Competitive Advantage:
1 | High-performance treating high-coloring effluent from textile dyeing mills, pigment mills, printing ink, and paper mills. |
2 | As flocculant to de-color high-coloring effluent from dyestuffs processing plants. |
3 | Stronger decolorization (50%~99%) and removal of COD (50%~80%). |
4 | Can be used as a retention agent in paper & pulp processing |
5 | Faster sedimentation, better flocculation. |
6 | Non-pollution (no aluminum, chlorine, heavy metal ions, etc.). |
7 | It can be used before or after biological treatment. |
8 | Less sludge is produced than other inorganic coagulants. |
Application Methods:
1 | Before use, make BWD-01 with fresh water 40-50 times, to have 2-2.5% concentration solution. |
2 | Make PAC solution with 2-5% Al2O3 content. |
3 | Make a solution of Anionic flocculant with 0.1% concentration. |
4 | It is very important, to adjust the effluent pH value to 8-10, with higher or lower pH, BWD-01 works not well. |
5 | Add PAC solution, and mix with effluent completely. about 1-3 minutes |
6 | Add BWD-01 solution, mix with effluent completely, about 5-10 minutes |
7 | Add a small content of anionic polyelectrolyte solution, and mix slowly to have a big floc. (This step is a suggestion) |
8 | Sedimentation |
9 | Check the color of treated effluent |
10 | Adjust the dosage of BWD-01 and PAC to do more tests to have better testing results. |
Package and Storage: